Vendor Quality Control Analyst jobs in New Mexico
Vendor Quality Control Analyst evaluates vendor operations, products, and services for compliance with government and company quality standards. Conducts audits and testing of products, materials, and processes to measure effectiveness and compliance with company expectations. Being a Vendor Quality Control Analyst analyzes and monitors metrics and KPIs to suggest improvement initiatives. Works with vendors and identifies alternative vendors to mitigate risks and resolve problems. Additionally, Vendor Quality Control Analyst assists with drafting and negotiating service-level agreements to ensure performance/quality metrics, responsibilities, expectations, and penalties are adequately defined. Prepares reports and updates on vendor status and quality. Requires a bachelor's degree. Typically reports to a manager or head of a unit/department. The Vendor Quality Control Analyst occasionally directed in several aspects of the work. Gaining exposure to some of the complex tasks within the job function. To be a Vendor Quality Control Analyst typically requires 2 -4 years of related experience. (Copyright 2024 Salary.com)
Recently Added Vendor Quality Control Analyst jobs
Quality Control Specialist
- Edgewater Technical Associates, LLC
-
Eunice, NM
FULL_TIME
-
Edgewater Technical Associates is seeking qualified candidates for a Quality Control Specialist opportunity in Eunice, NM at the Urenco USA (UUSA) National Enrichment Facility.
Work Location: On-Site at Urenco
Travel: 10% of the time or less/as required
Clearance Requirement: CAA Access; L or Q level clearance
Citizenship: United States Citizenship required.
UUSA, operated by Louisiana Energy Services LLC, is the only commercial enrichment facility operating in the US, and is located in Eunice, New Mexico.
The role of Quality Control Specialist is to support, control and inspect all quality graded equipment entering site, to ensure a high standard quality technical level and culture. Primary work will be conducted at Goods In and any supplier locations required.
Duties- Support the creation and implementation of the Goods Receipt process and any subsequent procedures;
- Organize and complete stores inspections of incoming quality graded goods;
- Liaise with procurement to ensure compliance to the requisitions and purchase orders are met by the vendors;
- Support off-site procurement inspections where required;
- Maintain up-to-date knowledge and understanding of NRC revisions to regulations, industry codes, and standards including, but not limited to, maintaining qualifications needed for Auditor certification per ANSI N45.2.23 and NQA-1;
- Develop and/or review QA manual and implementation procedures to verify compliance with industry codes and standards, NRC regulations, and regulatory commitments.
- Interface with LES Departments and vendors regarding quality issue identification and resolution.
- Oversee performance of general QC inspections, Receipt inspections, Structural inspections, Weld inspections, NDE inspections, Mechanical and/or Electrical inspections. Ensure that inspections are conducted in accordance with applicable procedures, guidance and regulations.
- Approve documents, checklists and agendas for audits, and approve audit/surveillance reports in a timely manner;
- Liaise with various stakeholders to ensure all procured products conform to the required national standards and specifications;
- Review and sign off all quality inspection acceptance notifications and any associated documentation;
- Carry out dimensional and visual inspections on quality graded equipment including visual welding inspections as per the contractual requirements;
- Be the Site Focal point for QA/QC activities for new or refurbished fabricated equipment, across multiple stakeholders;
- Undertake the role as technical quality authority and signatory for the goods inwards QA/QC process;
- Ensure that quality control plans (QCP) and Inspection and Test Plans (ITPs) are developed and implemented as per the purchase order requirements;
- Review all quality graded incoming Life Time Quality Records, ensuring they’re legible and correct the contract/purchase order;
- Monitor, raise and follow up on any non-conforming items as per the goods in procedure and NCR process;
- Comply with established company policies and procedures, objectives, quality assurance program, safety and environmental standards.
- Drive lessons learned from quality issues;
- Support internal and external audits, evaluations and assessments against relevant norms and standards;
- Perform daily QA/QC activities in Receiving Inspection, In-process/Finished product inspection, Device History Record (DHR) review and approval, assist material processing, assist in Non-Conformance Report (NCR) dispositioning, and participate in quality issue resolution and Corrective and Preventive Action system.
- Supervise special testing and inspection as required.
- Other duties may be assigned to meet business needs.
- Bachelor’s Degree in Engineering or Science related field, or equivalent combination of education and experience.
- Master’s Degree in engineering or science preferred.
- Mechanical or Electrical background with fabrication experience with QA/QC;
- Minimum of 5 years QA/QC experience, of which at least 2 as a QC Inspector;
- Work experience may be substituted based on the following criteria: An associate’s degree or equivalent may be substituted with an addition 4 years’ experience (for a total of six), and a High School Diploma may be substituted with an additional 8 years’ experience;
- Knowledge of NQA-1, ISO, ASTM, DIN, BSI and other international industry related standards;
- HNC or HND in Mechanical or Electrical Engineering desirable;
- Weld Inspection PCN level 2 or CSWIP 3.1;
- LPI, RAD Interpretation PCN level 2 preferred;
- Proficiency in Microsoft Office applications (e.g. Excel, Word, etc.)
- Possess a valid driver’s license with a driving record that will allow coverage under company insurance policies;
- Traveling can be required.
- Experienced Quality Control Specialist (minimum five years’ experience);
- Experienced in working with NQA-1;
- Experienced with certification processes within the technical industry;
- Experience in balancing the requirements of and prioritizing the activities associated with the successful execution of multiple projects. This includes but is not limited to the ability to consistently meet multiple deadlines;
- Experienced in working with Quality Control Processes and Plans;
- Experienced in reviewing Lifetime Quality Records within a regulated industry;
- Ability to read and interpret engineering drawings;
- Good reporting and writing skills;
- Proven work experience of welding processes and inspections;
- Knowledge and understanding of various NDT techniques;
- Knowledge of various inspection techniques using inspection equipment such as, borescope, callipers, inspection gauges etc;
- Demonstrated knowledge of the required quality standards;
- Masters the English language.
- Agile and flexible in approach to work to support the multiple aspects of the role;
- Ability to communicate effectively and collaborate with peers, staff, management, and vendors at all organizational levels in order to successfully meet needs;
- Ability to question the status quo and be comfortable with being challenged. Ability to adapt and respond effectively to new or changing conditions;
- Ability to identify, document, and provide corrective recommendations for root cause issues vs. symptoms;
- Acting decisively, thinks ahead and anticipates;
- Drives for results, focuses on improving performance;
- Self-motivated and driven to manage and complete assignments;
- High level of flexibility.
Performance of duties involves sitting, walking, standing, bending,
carrying of light items such as papers, books, small parts, driving an
automobile, etc. uneven ground, ladders, harness for hi-climbing, dust,
rain, snow; hearing protection for high noise environment; ability to
climb heights; avoid equipment and general construction hazards. While
some office work is involved, significant time in the field is expected to
observe inspection activities in progress.
If you are interested in being considered for this position and your resume clearly outlines your relevant experience for this position, please follow the application steps via our website: www.edgewatertech.net/careers
Edgewater will not submit your resume without first having detailed discussions with you and obtaining your permission to do so.
We look forward to hearing from you!
WORKING WITH EDGEWATER
Founded in 2003, Edgewater is a professional and technical services firm supporting the U.S. Department of Energy and the U.S., U.K., and Canadian Commercial Nuclear Industry, and private sector businesses involved in high-hazard or complex operations. Edgewater proudly offers expertise in numerous technical disciplines necessary to support operational environments where Integrated Safety Management and formal, disciplined operations are essential to ensure safety, quality, security, and regulatory compliance.
Edgewater is committed to recruiting and maintaining a staff of highly skilled professionals to support our customers. In keeping with this objective, we offer highly competitive salaries and employee benefit packages structured to best suit your needs. We offer multiple individual and family benefit options including paid time off, medical, dental, life, vision, and disability insurance, and a pre-tax 401 (k) retirement account with Company matching contributions and 100% vesting for eligible participants beginning DAY 1.
EQUAL OPPORTUNITY EMPLOYER
Edgewater is an equal opportunity employer and all qualified applicants will be considered for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, protected Veterans, or individuals with disabilities.
View all Edgewater opportunities at www.edgewatertech.net/careers - 4 Days Ago
Quality Control Manager
- Flux Resources, LLC
-
Albuquerque, NM
FULL_TIME
- Contractor Quality Control Manager: Must have a minimum of 5 years construction related experience as a CQC on airfield projects of similar magnitude and complexity as this project.Flux is an Equal Op...
- 4 Days Ago
Quality Control Technician
- CableCom
-
Albuquerque, NM
FULL_TIME
- Overview and Essential FunctionsOverview Looking for an opportunity to make a difference? Then you may have found your next career move. We’re looking for a Technician Quality Control to join our team...
- 5 Days Ago
Quality Control Officer
- Oak Grove Technologies
-
Artesia, NM
OTHER
- Overview As a Quality Control Technician at Oak Grove Technologies, you will be responsible for ensuring comprehensive contract compliance, quality assurance, environmental compliance, and safety adhe...
- 7 Days Ago
Quality Control Specialist
- Synergy Solutions
-
Cannon, NM
FULL_TIME
- Responsibilities: Read and interpret specifications, plans and resource documents to determine requirements and planning procedures as outlined in the RFP Develop and implement Quality Control plan Ma...
- 14 Days Ago
Director, Quality Control
- Careers|CURIA
-
Albuquerque, NM
FULL_TIME
- Summary: The Director of Quality Control (QC) is responsible for leading the Quality Control Unit (Microbiology & Chemistry) at the site and for providing analytical technical guidance to the various ...
- 14 Days Ago
Vendor Quality Control Analyst jobs at Popular Companies
Quality Control Analyst
- Hiring Now!
-
Kansas City, MO
- Ingredion is hiring for a QC Analyst based out of the North Kansas City site. This role will be responsible for performi...
- 6/11/2024 12:00:00 AM
Quality Control Analyst
- Meet
-
Novato, CA
- Our esteemed client, a leading pharmaceutical company known for its continuous growth, is seeking a Quality Control (QC)...
- 6/10/2024 12:00:00 AM
Quality Control Analyst
- BEPC Inc. - Business Excellence Professional Consulting
-
Vacaville, CA
- BEPC has an open position for a QC Analyst I in Vacaville, CA! Contract W2 Period: 6-month contract with possibilities f...
- 6/9/2024 12:00:00 AM
Quality Control Analyst
- WuXi AppTec
-
2108 Couvet, NE
- This position is responsible to perform all type of analytical testing that is required for release of raw and packaging...
- 6/9/2024 12:00:00 AM
Quality Control Analyst
- ACL Digital
-
Newark, CA
- Job Title: QC Analyst/Analyst II, QC Cell and Molecular Biology. Location: Newark, CA Duration: 08 Months This role is f...
- 6/8/2024 12:00:00 AM
Quality Control Analyst
- Randstad Sourceright
-
Glendale, CA
- At one of our top Pharmaceutical companies, we are transforming the pharmaceutical industry through our R&D-driven marke...
- 6/8/2024 12:00:00 AM
Quality Control Analyst
- EPM Scientific
-
Boston, MA
- EPM currently working with a reputable pharmaceutical client and they are looking for an QC Analyst contractor to help w...
- 6/7/2024 12:00:00 AM
Quality Control Analyst
- Haleon
-
Dungarvan, WD
- Hello. We’re Haleon. A new world-leading consumer health company. Shaped by all who join us. Together, we’re improving e...
- 5/29/2024 12:00:00 AM
About New Mexico
New Mexico (Spanish: Nuevo México Spanish pronunciation: [ˈnweβo ˈmexiko] (listen), Navajo: Yootó Hahoodzo pronounced [jòːtxó xɑ̀xʷòːtsò]) is a state in the Southwestern region of the United States of America; its capital and cultural center is Santa Fe, which was founded in 1610 as capital of Nuevo México (itself established as a province of New Spain in 1598), while its largest city is Albuquerque with its accompanying metropolitan area. It is one of the Mountain States and shares the Four Corners region with Utah, Colorado, and Arizona; its other neighboring states are Oklahoma to the north...
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for Vendor Quality Control Analyst jobs
$77,266 to $91,749